Airloy® HT Flexible Foam

Mark Schneider — Wed, 24 Aug 2022 17:58:19 +0000

Airloy^® HT from Aerogel Technologies is a superinsulating, dust-free, high-temperature, flexible aerogel material that handles like foam. With a thermal conductivity of only 20 mW/m-K, Airloy HT provides up to 50% better thermal insulating performance per unit thickness than conventional insulators such as expanded polystyrene and fiberglass. Airloy HT is also water resistant, non-flammable, and offers superlative sound transmission loss, making it a multifunctional solution for a wide range of real-world applications. With an operating temperature up to 300°C, Airloy HT is an ideal material for maximizing thermal performance while minimizing thickness in automotive, aerospace, apparel, physical plant, and consumer electronics applications. Easy to cut and adhere. Sold in 2 mm thick sheets. For applications requiring thicker materials, simply adhere multiple layers together. Made with NASA technology.

For a similar material that is stiffer and even tougher, consider Airloy HR.

Download the material SDS here.
Download the material TDS here.

Density^a	Nominal Thickness^a	Operating Temperature^a	Thermal Conductivity at 25°C^a	R value per inch^a,b	Sound Transmission Loss^a
0.11 ± 0.02 g/cc	2 mm	300°C	20 mW/m-K	7.2	>20 dB/cm over 300-5,000 Hz

^a Approximate values. For reference only.
^b R value in US units ft²·°F·h/BTU

For volume purchases/pricing, or custom sizes/thicknesses, please contact us.

Please see our patent and trademark information page for information for patents protecting this product.

SLENTITE® Aerogel Panels for Construction

Mark Schneider — Fri, 20 May 2022 17:23:03 +0000

SLENTITE^® from aerogel-it is a revolutionary new type of insulation board for use in construction, appliances, cold chain logistics, and engineering. Born in the laboratories of BASF and brought to market by aerogel-it, SLENTITE has an R-value of R8 per inch, making it the most insulating construction insulation board on the market. Open porous structure and moisture management properties makes it especially suitable for applications where humidity is a challenge such as interior insulation in buildings. Unlike most spray foams, SLENTITE’s insulative performance doesn’t degrade over time. Water proof, dust free, machinable, and easy to install. Just 13-15 mm thick, SLENTITE is ideal for stopping heat loss in tight spaces where traditional insulation materials are inadequate. For an even more effective thermal barrier, these panels are easily glued together using a non solvent-based adhesive to make thicker panels. As an organic material, SLENTITE provides a limited susceptibility to fire (Euroclass E EN 13501-1). Sold in full panel, half panel, and tile sizes.

Download the Material TDS here.

For operating temperatures up to 300°C, choose Airloy X116 instead.

Density	Compressive Yield Strength^a	Thermal Conductivity^a	R value per inch^a,b
0.12 ± 0.02 g/cc	>0.3 MPa	18 mW/m-K	8.0

^aSee attached datasheet for measurement method
^bR value in US units ft2·°F·h/BTU

For volume purchases/pricing, or custom thicknesses, please contact us.

Please see our patent and trademark information page for information for patents protecting this product.

BuyAerogel.com

Airloy® HT Flexible Foam

SLENTITE® Aerogel Panels for Construction